•  
  •  
 

Journal of Materials Exploration and Findings

Abstract

The application of WPC is not only limited to indoor applications but has been extended to exterior applications where properties of WPC could compromise during service life. WPC was derived from wood fiber of various sizes to reinforce polymers. Wood fiber has the advantage of a cheaper price, being abundantly available, and ease of processing, however, the critical factor is its hydrophilic nature, where moisture absorption is likely to occur. Thus, treatments for reducing the hydrophilicity of wood fibers are applied. By treatment of wood fiber, the surface impurities were removed, leaving the roughened surface of fibers, thus providing a good surface for fiber-matrix interaction. The purpose of this study is to systematically review the effect of heat treatment and chemical treatment on wood fiber on the durability of WPC. The literature cited was searched in Scopus with related keywords – leading to 4292 articles. Article search was then limited from 2012 to 2021 and led to 443 articles to identify and analyze focusing on the durability of WPC. After fine-tuning, only 30 articles were considered to answer the research question in this study. The finding reveals that the treatment of wood fiber has a significant effect on the durability of WPC. Heat and chemical treatment were observed to improve the interfacial adhesion and resistance to fungal attack and the mechanical and physical properties of WPCs.

References

  1. Ashori, A, Behzad, HM & Tarmian, A 2013, ‘Effects of chemical preservative treatments on durability of wood flour/HDPE composites’, Composites: Part, vol. 47, pp. 308-313, DOI:10.1016/j.compositesb.2012.11.022

  2. Aydemir, D, Alsan, M, Can, A, Altuntas, E & Sivrikaya, H 2019, ‘Accelerated weathering and decay resistance of heat-treated wood reinforced polypropylene composites’, Drvna Industrija, vol. 70, no. 3, pp. 279-285,DOI:10.5552/drvind.2019.1851
  3. Barton-Pudlik, J, Czaja, K, Grzymek, M & Lipok, J 2017, ‘Evaluation of wood-polyethylene composites biodegradability caused by filamentous fungi’, International Biodeterioration and Biodegradation, vol. 118, pp. 10-18, DOI:10.1016/j.ibiod.2017.01.014
  4. Chan, CM, Pratt, S, Halley, P, Richardson, D, Werker, A, Laycock, B & Vandi, LJ 2019, ‘Mechanical and physical stability of polyhydroxyalkanoate (PHA)-based wood plastic composites (WPCs) under natural weathering’, Polymer Testing, vol. 73, pp. 214-221, DOI:10.1016/j.polymertesting.2018.11.028
  5. Chen, Y, Stark, NM, Tshabalala, MA, Gao, J & Fan, G 2016, ‘Weathering Characteristics of Wood Plastic Composites Reinforced with Extracted or Delignified Wood Floor’, Materials, vol. 9, pp. 610-621, DOI:10.3390/ma9080610
  6. Ebe, K & Sekino, N 2015, ‘Surface deterioration of wood plastic composites under outdoor exposure’, Journal of Wood Science, vol. 61, pp. 143-150, DOI:10.1007/s10086-014-1449-4
  7. Fabiyi, JS & McDonald, AG 2012, ‘Weathering performance of delignified pine-based polyvinyl chloride composites’, Journal of Reinforced Plastic & Composites, vol. 32, no. 8, pp, 547-563, DOI:10.1177/0731684412472382
  8. Friedrich, D & Lubile, A 2016, ‘Investigations on ageing of wood-plastic composites for outdoor applications: A meta-analysis using empiric data derived from diverse weathering trials’, Construction and Building Materials, vol. 124, pp. 1142-1152, DOI: 10.1016/j.conbuildmat.2016.08.123
  9. Gardner, DJ, Han, Y, & Wang, Lu 2015, ‘Wood-Plastic Composite Technology’, Current Forestry Report, vol. 1, pp. 139-150, DOI: 10.1007/s40725-015-0016-6
  10. Gunjal, J, Aggarwal, P & Chauhan, S 2020, ‘Changes in colour and mechanical properties of wood polypropylene composites on natural weathering’, Maderas: Ciencia y Tecnologia, vol. 22, pp. 325-334, DOI:10.4067/S0718-221X2020005000307
  11. Jais, FHM, Omar, NAA, & Rus, AZM 2016, ‘Photostability Characterization of Wood Polymer Composites of Polyvinyl Chloride and Rice Husk to Ultra-Violet Irradiation Exposure’, MATEC Web of Conferences, vol. 78, 01033, DOI:10.1051/matecconf/20167801033
  12. Jiang, L, He, C, Fu, J & Li, X 2018a, ‘Wear Behaviour of Alkali-Treated Sorghum Straw Fibre Reinforced Polyvinyl Chloride Composites in Corrosive Water Conditions’ BioResources, vol. 13, no. 2, pp. 3362-3376, DOI:10.15376/biores.13.2.3362-3376
  13. Jiang, L, He, C, Li, X & Fu, J 2018b, ‘Wear Properties of Wood-plastic Composites Pretreated with a Stearic Acid-palmitic Acid Mixture before Exposure to Degradative Water Conditions’ BioResources, vol. 13, no.2, pp. 3817-3831, DOI:10.15376/biores.13.2.3817-3831
  14. Koffi, A, Mijiyawa, F, Koffi, D, Erchiqui, F & Toubal, L 2021, ‘Mechanical properties,wettability and thermal degradation of HDPE/birch fiber composite’, Composites Part A: Applied Science and Manufacturing, vol. 139, DOI:10.1016/j.compositesa.2020.106102
  15. Koivuranta, E, Hietala, M, Ämälä, A, Oksman, K & Illikainen, M 2017, ‘Improved durability of lignocellulose-polypropylene composites manufactured using twin-screw extrusion’ Composites: Part A, vol. 101, 265-272, DOI:10.1016/j.compositesa.2017.06.024
  16. Kuka, E, Andersons, B, Cirule, D, Andersone, I, Kajaks, J, Militz, H & Bicke, S 2020, ‘Weathering properties of wood-plastic composites based on heat-treated wood and polypropylene’, Composites Part A: Applied Science and Manufacturing, vol. 139, DOI: 10.1016/j.compositesa.2020.106102
  17. Motoc, DL, Bou, SF & Pop, AP 2018, ‘Thermal degradation and stability of wood particle composites deployed as decorative components’ MATEC Web of Conferences, vol. 184, DOI:10.1051/matecconf/201818401016
  18. Mansour, MMA, Nasser, RA, Salem, MZM, Ali, HM & Hatamleh, AA 2017, ‘Study of mold invasion on the surface of wood/polypropylene composites produced from aqueous pretreated wood particles, part 2: Juniperus procera wood-branch’, BioResources. Vol. 12, no. 2, pp. 4187-4201, DOI:10.15376/biores.12.2.4187-4201
  19. Matuana, LM & Stark, NM 2015, ‘The use of wood fibers as reinforcements in composites’, In Biofiber reinforcements in composite materials, pp. 648-688, Woodhead Publishing, DOI: 10.1533/9781782421276.5.648
  20. Mazzanti, V & Mollica, F 2015, ‘In-line rheometry of polypropylene based Wood Polymer Composites’, Polymer Testing, vol. 47, pp. 30-35, DOI:10.1016/j.polymertesting.2015.08.003
  21. Mazzanti, V & Mollica, F 2017, ‘Bending Properties of Wood Flour Filled Polyethylene in Wet Environment’, Procedia Engineering, vol. 200, pp. 68-72, DOI:10.1016/j.proeng.2017.07.01
  22. Nasser, RA, Mansour, MMA, Salem, MZM, Ali, HM & Aref, IM 2017, ‘Mold Invasion on the surface of wood/polypropylene composites produced from aqueous pretreated wood particles, part 1: Date palm midrib’, BioResources, vol. 12, no. 2, pp. 4078-4092, DOI:10.15376/biores.12.2.4078-4092
  23. Naumann, A, Stephan, I & Noll, M 2012, ‘Material resistance of weathered wood-plastic composites against fungal decay’, International Biodeterioration and Biodegradatio, vol. 75, pp. 28-35, DOI:10.1016/j.ibiod.2012.08.004
  24. Olakanmi, EO & Strydom, MJ 2016, ’Critical materials and processing challenges affecting the interface and functional performance of wood polymer composites (WPCs)’, Materials Chemistry and Physics, vol. 171, pp. 290-302, DOI:10.1016/j.matchemphys.2016.01.020
  25. Platnieks, O, Gaidukovs, S, Barkane, A, Sereda, A, Gaidukova, G, Grase, L, Thakur, VK, Filipova, I, Fridrihsone, V, Skute, M & Laka, M 2020, ‘Bio-based poly(butylene succinate)/microcrystalline cellulose/nanofibrillated cellulose-based sustainable polymer composites: Thermo-mechanical and biodegradation studies’, Polymers. vol. 12, no. 7. pp. 1-20. DOI: 10.3390/polym12071472
  26. Ren, Z, Wang, C, Zuo, Q, Yousfani, SHS, Anuar, NIS, Zakaria, S, Liu, X, 2019, ‘Effect of Alkali Treatment in Interfacial and Mechanical Properties of Kenaf Fiber Reinforced Epoxy Unidirectional Composites’, Sains Malaysiana, vol. 48, no. 1, 173-181, DOI:10.17576/jsm-2019-4801-20
  27. Sarabi, MT, Behravesh, AH, Shahi, P & Daryabari, Y 2012, ‘Effect of polymeric matrix melt flow index in reprocessing extruded wood-plastic composites’ Journal of Thermoplastic Composites Materials, vol. 27, no. 2, pp. 881-894, DOI:10.1177/0892705712458445
  28. Segerholm, BK, Ibach, RE & Westin, M 2012, ‘Moisture sorption, biological durability, and mechanical performance of WPC containing modified wood and polylactates’, BioResources, vol. 7, no. 4, pp. 4575-4585, DOI:10.15376/biores.7.4.4575-4585
  29. Soccalingame, L, Perrin, D, Bénézet, JC, & Bergeret, A 2016, ‘Reprocessing of UV-weathered wood flour reinforced polypropylene composites: Study of a natural outdoor exposure’, Polymer Degradation and Stability, vol. 133, pp. 389-398, DOI: 10.1016/j.polymdegradstab.2015.07.013
  30. Tazi, M, Erchiqui, F & Kaddami, H 2015, ‘Evaluation of mechanical properties and durability performance of HDPE-wood composites’, AIP Conference Proceedings 1664, 150001, DOI:10.1063/1.4918497
  31. Yang, H, Yan, R, Chen, H, Lee, DH, Zheng, C 2007, ‘Characteristics of Hemicellulose, Cellulose and Lignin Pyrolysis’, Fuel, vol. 86 no. 12-13, pp. 1781-1788, DOI:10.1016/j.fuel.2006.12.013
  32. Zhong, X, Zhu, Y, Liu, S, Fu, J, Lin, H & He, C 2020, ‘Performance Analysis of Four Plant Fibre/Polyvinyl Chloride Composites under Two Degradation Conditions with Water or Seawater with Xenon Lamp’, BioResources, vol. 15, no. 3, pp. 4672-4688, DOI:10.15376/biores.15.3.4672-4688

Download

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.