Effect of Alkyd and Polyester Resin Compositions on Corrosion Resistance, Blistering, and Adhesion in utilization of Oily Sludge as Anti-rust Coating Material

Authors

Gerets Land Kakalang, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, IndonesiaFollow
Yohanes David Kristianto, Project Quality, Vetco Gray Pte Ltd., 2 Benoi Road 629876, SingaporeFollow
Johny Wahyuadi Mudaryoto, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, IndonesiaFollow

Abstract

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and polyester resin on corrosion resistance, adhesion resistance, and pinhole characteristics of anti-rust coating materials. The method used in this research is that the oily sludge added to the forming ingredients for the coating, namely: CaCO₃ (Calcium Carbonate), resin (polyester and alkyd), asphalt, wax and additives with a certain composition. The effect of adding 20 g resin will improve the corrosion resistance, blistering, and adhesion. Alkyd resins produce better corrosion and blistering resistance than polyester resins, where there is a 31% decrease in rust width for alkyd resins and 9% for polyester resins. As for adhesion, good results were obtained for both resins. In the pin holes test, pin holes were found to form in both resins. While in the atmospheric exposure test in the Tanjung Priok area, sample G1 was found to have undercutting while samples G5 and G6 formed alligatoring.

References

ASM International 1987, Metals Handbook – Corrosion (9th edition, Volume 13).

ASTM International, ASTM D3359 – Standard Test Methods for Rating Adhesion by Tape Test.

De Wit, J H W & Van der Weijde, D H 1995, Corrosion mechanisms in theory and practice, Marcel Dekker: New York.

Fontana, M G 1986, Corrosion Engineering (3rd edition), McGraw-Hill International: Singapore.

Gapsari, F, Setyarini, P H & Alamsyah, F A 2012, ‘Pengaruh Kekasaran Permukaan Terhadap Porositas Hasil Hot Dipped Galvanizing (HDG),’ Jurnal Rekayasa Mesin Universitas Brawijaya, 3(1), pp.283-292.

Jones, D A 1992, Principles and Prevention of Corrosion, MacMillan Publishing: New York.

Lekatompessy, S T A & Latuhihin, G R 2018, ‘Experimental Study Of Corrosion Rate On Steel Ships,’ Prosiding Archipelago Engineering, 1(1), pp.70-79.

Magdaleno-López, C & de Jesús Pérez-Bueno, J 2020, ‘Quantitative evaluation for the ASTM D4541-17/D7234 and ASTM D3359 adhesion norms with digital optical microscopy for surface modifications with flame and APPJ,’ International Journal of Adhesion and Adhesives, 98, p.102551.

Makhfudz, L 1997, Effect of using waste solvents and changing filler composition on the characteristics of bitumen-based anti-rust coating, Thesis Department of Metallurgy FTUI, Depok.

Mallick, P K 1993, Fiber-Reinforced Composites-Materials, Manufacturing, and Design, Marcel Dekker: New York.

Miana, M 1997, The Possibility of Utilisation of Filtrate from the Treatment of MFO Oil Sludge Effluent, Thesis Departement of Gas dan Petrochemical FTUI, Depok.

Ramli, S 1995, Upaya Pengolahan Limbah Minyak di Lingkungan Industri Migas, Pertamina.

Samsoni, S 2001, Used of Sludge as a base for corrosion-resistant organic coatings and the effect of asphalt and talc composition on its characteristics, Department of Metallurgical and Materials FTUI, Depok.

Setyo, B 2000, Study of the Effect of Changes in the Composition of Sludge and Resin on the characteristics of Sludge-Based Anti-corrosion Coating Materials, Department of Metallurgy FTUI, Depok.

Tator, K B 1989, Corrosion and Corrosion Protection Handbook, Marcel Dekker: New York.

Recommended Citation

Kakalang, Gerets Land; Kristianto, Yohanes David; and Mudaryoto, Johny Wahyuadi (2024) "Effect of Alkyd and Polyester Resin Compositions on Corrosion Resistance, Blistering, and Adhesion in utilization of Oily Sludge as Anti-rust Coating Material," Journal of Materials Exploration and Findings: Vol. 3: Iss. 3, Article 2.
DOI: 10.7454/jmef.v3i3.1058
Available at: https://scholarhub.ui.ac.id/jmef/vol3/iss3/2