Journal of Materials Exploration and Findings
Abstract
Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the probability and consequences of failure. The analysis shows that the production separator is in the low-risk category. The next inspection schedule is determined based on RBI estimation which is 13 years after the last inspection. Inspection methods that can be applied to subsea pipeline based on DNVGL-RP-F116 standard are external inspection, in-line inspection with intelligent pig, and monitoring system. For external inspection can use Remotely Operated Vehicle (ROV). In-line inspection (ILI) with intelligent pig need to validate by with underwater UT B-Scan in the following year. The monitoring system only needs to be continued from what has been installed, corrosion coupon. It only needs to be adjusted for the length of installation time according to its purpose, to measure corrosion rate or detect pitting.
References
Alfon, P, Soedarsono, J, W, Priadi, D & Sulistijono 2012, ‘Pipeline material reliability analysis regarding to probability of failure using corrosion degradation model’, Advanced Materials Research, 422, pp.705-715.
American Petroleum Institute 2020, Risk Based Inspection Methodology API Recommended Practice 581, 3rd Edition, addendum 2, API Publishing Service, Washington D.C.
American Society of Mechanical Engineers 2022, ASME B31.4 Pipeline Transportation Systems for Liquids and Slurries, ASME, New York.
Asfar, M I Y, Soedarsono, J W, Wijaya, A, Aditiyawarman, T, Soelistiyono, D & Ramadhan, R 2021, ‘Quantitative Risk-Based Inspection on Gas Riser Pipelines at Offshore Facilities’, Teknomekanik, 4(2), pp.78-84.
Directorate General of Oil and Gas Ministry of Energy and Mineral Resources 2021, Statistic Oil and Gas 2021, Indonesia.
DNVGL 2010, DNVGL-RP-F107 Risk Assessment of Pipeline Protection, Bærum, Norway.
DNVGL 2017, DNVGL-RP-F116 Integrity management of submarine pipeline systems, Edition May 2017, Bærum, Norway.
Groysman, A 2017, ‘Corrosion problems and solutions in oil, gas, refining and petrochemical industry’, KOM–Corrosion and Material Protection Journal, 61(3), pp.100-117.
Haryadi, G D, Ismail, R & Kim, S J 2017, ‘Risk Analysis of Central Java Gas Transmission Pipeline by Risk-Based Inspection Method’, In IOP Conference Series: Materials Science and Engineering, 202(1), pp.012094.
Haryadi, G D, Suprihanto, A, Wirantho, J & Haryanto, I 2020, ‘Risk Analysis and Lifetime Remaining Prediction on Straight Ø 14” Gas Pipe Using Risk Based Inspection Method Based on API 581’, Crankshaft Journal, 3(1), pp.1-11.
Marquez, A, Ramoutar, S & Maharaj, C 2023, ‘Inspection Analysis of Crude Oil Pipelines—Damages, Failures and Preventive Program’, Journal of Failure Analysis and Prevention, 23(2), pp.700-710.
NACE 2015, SP0204 Stress Corrosion Cracking (SCC) Direct Assessment Methodology, NACE International, Texas.
Nurbayanah, S, Soedarsono, J W, Munir, B & Mahendra, M 2024, ‘Implementation of the Risk Based Inspection Method in Storage Tanks at PT. ABC in Determining Inspection Intervals and Methods’, MALCOM: Indonesian Journal of Machine Learning and Computer Science, 4(1), pp.317-328.
Padmodwiputra, R, Soedarsono, J W, Mahendra, M, Satria, B E, Arif, C & Suarthana, E J 2022, ‘Structural Integrity Analysis of the Rig Mast Following Repair of Two Diagonal Braces in the Upper Mast Section’, Journal of Materials Exploration and Findings, 1(3), pp.131-141.
Priyanta, D, Siswantoro, N & Megawan, A M 2017, ‘Risk Based Inspection of Gas-Cooling Heat Exchanger’, International Journal of Marine Engineering Innovation and Research, 1(4), pp.317-329.
Putra, I F, Soedarsono, J W, Mahendra, M, Haidir, Y, Purnawarman, F D, Sukirna, I & Hernowo, W 2022a, ‘Structural Risk-based Underwater Inspection (RBUI) as a Cost Reduction of Field’s End of Production Life’, Journal of Materials Exploration and Findings, 1(2), pp.45-56.
Putra, A P, Soedarsono, J W, Pangesty, A I, Asfar, M I Y, Aprizal & Ramadhan, R 2022b, ‘Risk Identification on 3" GL BO3-52520 Process Pipelines Using a Risk-Based Inspection Method’, Teknomekanik, 5(1), pp.28-34.
Qin, M, Liao, K, He, G, He T, Leng, J & Zhang, S 2023, ‘Quantitative risk assessment of static equipment in petroleum and natural gas processing station based on corrosion-thinning failure degree’, Process Safety and Environmental Protection, 172, pp.144–156.
Siswantoro, N, Priyanta, D, Ramadhan, J & Zaman, M B 2021, ‘Implementation of Risk Based Inspection (RBI) in Condensate Separator and Storage Vessel: A Case Study’, International Journal of Marine Engineering Innovation and Research, 6(1), pp.1-10.
Soedarsono, J W, Wijaya, A, Aditiyawarman, T, Kaban, A P S, Riastuti, R, Ramdhani, R T & Ayende 2023, ‘Development of risk-based inspection of 28-years-old subsea sales gas pipelines to support the energy demand’, Eastern-EuropeanJournal of Enterprise Technologies, 122(3), pp.17–27.
Sulistomo, T R & Surjosatyo, A 2023, ‘Risk-Based Inspection of Crude and Refined Oil Storage Tank in Indonesia Refinery Plant’, International Journal of Mechanical Engineering Technologies & Applications, 4(1), pp.84-96.
Tiggor, T P & Riastuti, R 2022, ‘Risk Management of Carbon Steel Piping in Sweet Environment Multiphase Fluid Production’, Journal of Materials Exploration and Findings, 1(2), pp.69-85.
Zhang, M, Liang, W, Qiu, Z & Lin, Y 2017, ‘Application of Risk-Based Inspection method for gas compressor station’, In Journal of Physics: Conference Series, 842(1), pp.012064.
Recommended Citation
Adelia, Ni Luh Triska; Munir, Badrul; and Soedarsono, Johny Wahyuadi
(2024)
"Inspection Planning of Subsea Pipeline Using Risk-Based Inspection,"
Journal of Materials Exploration and Findings: Vol. 3:
Iss.
2, Article 1.
DOI: 10.7454/jmef.v3i2.1047
Available at:
https://scholarhub.ui.ac.id/jmef/vol3/iss2/1
Included in
Industrial Engineering Commons, Materials Science and Engineering Commons, Ocean Engineering Commons, Petroleum Engineering Commons, Risk Analysis Commons