Feasibility Study of Using Energy Extracted from The Process of Electrochemically Consumed of Al 2024 for Powering Daily Used Electric Car

Authors

Yanuar Mohamad Marda, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, 16424, IndonesiaFollow
Rini Riastuti, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, 16424, IndonesiaFollow
Muhammad Hamka Ibrahim, Department of Electrical Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, East Java, 57126, IndonesiaFollow

Abstract

Usage of green energy for transportation has become important due to the contribution of transportation activity to climate change. Electrochemical energy has been used as a source of green energy. The objective of this work is to evaluate sufficiency of energy provided by electrochemically consumed Al 2024 for supplying energy to daily used PHEV electric car. Study of previous articles, observation of typical amount of energy required, electrochemical galvanic cell experiments, and simple calculations have been conducted to determine produced energy feasibility. Electrical energy produced by consuming 340 gr of Al 2024 in galvanic cells has the total lifetime of 10.8 hours and the mileage covered on the electric vehicle mode is 234.9 km. It can be used to cover most of the energy needed for a daily combination of sub-urban and urban city car.

References

Abdelshafi, N S, Sadik, M A, Shoeib, M A & Halim, S A 2022, ‘Corrosion inhibition of aluminum in 1 M HCl by novel pyrimidine derivatives, EFM measurements, DFT calculations and MD simulation’, Arabian Journal of Chemistry, 15(1), pp.103459.

Al-Moubaraki, A H & Al-Rushud, H H 2018, ‘The red sea as a corrosive environment: corrosion rates and corrosion mechanism of aluminum alloys 7075, 2024, and 6061’, International Journal of Corrosion, 2018(1), pp.2381287.

ANSI 2024, Aerospace Material Specification, accessed 14 May 2024, (https://webstore.ansi.org/standards/sae/saeams44622011ams4462/).

Bhaskara, S, Fakrudeen, S P, Desalegn, T, Murthy, H A & Bheemaraju, V 2021, ‘Evaluation of corrosion inhibition efficiency of aluminum alloy 2024 by diaminostilbene and Azobenzene Schiff bases in 1 M hydrochloric acid’, International Journal of Corrosion, 2021(1), pp.5869915.

Blumenberg, E & Pierce, G 2017, ‘The Drive to Work: The Relationship between Transportation Access, Housing Assistance, and Employment among Participants in the Welfare to Work Voucher Program’, Journal of Planning Education and Research, 37(1), pp.66-82.

Chang, R 2005, Chemistry, McGraw-Hill, New York.

Chen, C F, Baart, B V, Zhang, J & Zhang, L 2021, ‘Polystyrene/TiO₂ nanocomposite coating for strength and toughness enhancement of aluminum alloy 2024–T3 in accelerated stress corrosion cracking’, Progress in Organic Coating, 161, pp.106458

Cheng, T, Huang, H & Huang, G 2022, ‘Galvanic corrosion behavior between ADC12 aluminum alloy and copper in 3.5 wt% NaCl solution’, Journal of Electroanalytical Chemistry, 927, pp.116984.

Deng, P, Mo, W, Ouyang, Z, Ling, K, Luo, B & Bai, Z 2023, ‘Microstructural evolution and corrosion mechanism of micro-alloyed 2024 (Zr, Sc, Ag) aluminum alloys’, Corrosion Science, 224, pp.111476.

Elsayed, A, Nofal, A & Attia, G 2022, ‘Development of metal oxide incorporated Al‑Zn‑Sn sacrificial anodes processed by stir casting and heat treatment’, Journal of Solid State Electrochemistry, 26(12), pp.2659-2672.

Emarati, S & Mozzamil, M 2020, ‘Theoretical, fundamental and experimental study of Liquid-repellency and corrosion resistance of fabricated superamphiphobic surface on Al alloy 2024’ Chemical Engineering Journal, 387, pp.124046.

Ferdian, D, Yudha, R D, Ario, W M, Yunita, T & Sulistijono 2019, ‘Efficiency and characterization study of low voltage current sacrificial anode on Al-Zn-Cu and Al-Zn-Si alloy’, In IOP Conference Series: Materials Science and Engineering, 541(1), pp.012047.

Fernine, Y, Ech-chihbi, E, Arrouse, N, El Hajjaji, F, Bousraf, F, Touhami, M E, Rais, Z & Taleb, M 2021, ‘Ocimum basilicium seeds extract as an environmentally friendly antioxidant and corrosion inhibitor for aluminium alloy 2024 -T3 corrosion in 3 wt% NaCl medium’, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 627, pp.127232.

IEA 2023, Electric car sales break new records with momentum expected to continue through 2023, accessed 1 November 2023, (https://www.iea.org/reports/global-ev-outlook-2023/executive-summary).

Kosasih, R, Suliyanti, M M, Priadi, D & Usni, W 2023, ‘Optimization of AlTi PLD coating by increasing Ti content, N2 and Annealing which used for SKD61 pins in aluminum die casting’, Journal of Materials Exploration and Findings, 2(2), pp.67-79.

Li, Y, Li, K, Xie, Y, Liu, J, Fu, C & Liu, B 2020, ‘Optimized charging of lithium-ion battery for electric vehicles: Adaptive multistage constant current-constant voltage charging strategy’, Renewable Energy, 146, pp.2688-2699.

Liu, X, Lin, Y, Liu, N &Yuan, H 2024, ‘Effect of Alloy Elements on the Performance of Al Sacrificial Anode’, In Journal of Physics: Conference Series, 2679(1), pp.012036.

Maghfiroh, H, Hermanu, C, Ibrahim, M H & Nizam, M 2019, ‘Low-Cost Charging Station for Electric Vehicle: Design and Prototyping’, In 2019 6th International Conference on Electric Vehicular Technology, pp.20-24.

Makeen, P, Ghali, H A & Memon, S 2020, ‘Experimental and Theoretical Analysis of the Fast-Charging Polymer Lithium-Ion Battery Based on Cuckoo Optimization Algorithm (COA)’, IEEE Access, 8, pp. 140486-140496.

Méndez-Figueroa, H G, Ossandón, S, Fernández, J A R, Martinez, R G, Vazquez, A E & Orozco-Cruz, R 2022, ‘Electrochemical evaluation of an Acanthocereus tetragonus aqueous extract on aluminum in NaCl (0.6 M) and HCl (1 M) and its modelling using forward and inverse artificial neural networks’, Journal of Electroanalytical Chemistry, 918, pp.116444.

Meng, A, Sun, Y, Cheng, W, Huang, L & Chen, Y 2024, ‘Discharge performance of Al-0.1Sn-0.1In-0.05Ga alloy for Al–air battery anodes’, Journal of Energy Storage, 81, pp.110414.

NASA 2023, The Causes of Climate Change, accessed 1 November 2023, (https://climate.nasa.gov/causes/).

Our World In Data 2023, Fossil fuels, accessed 2 November 2023, (https://ourworldindata.org/fossil-fuels#what-share-of-primary-energy-comes-from-fossil-fuels).

Ran, Q, Shi, H, Meng, H, Zeng, S P, Wan, W B, Zhang, W, Wen, Z, Lang, X & Jiang, Q 2022, ‘Aluminum-copper alloy anode materials for high-energy aqueous aluminum batteries’, Nature Communications, 13(1), pp.576.

Rohmannudin, T N, Sulistijono, S, Adrinanda, N, Dharma, F W & Areliano, S 2022, ‘Development of Battery Materials to Function as Corrosion Protection on Car Body Plates’, Journal of Materials Exploration and Findings, 1(3), pp.103-107.

Toyota 2024, The New Toyota Prius Plug-in Hybrid, accessed 2 January 2024, (https://media.toyota.co.uk/the-new-toyota-prius-plug-in-hybrid/).

Vitry, V, Sens, A, Kanta, A F & Delaunois, F 2012, ‘Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminum alloys’, Surface & Coatings Technology, 206(16), pp.3421-3427.

Wen, L, Wang, Y, Jin, Y, Liu, B, Zhou, Y & Sun, D 2013, ‘Microarc oxidation of 2024 Al alloy using spraying polar and its influence on microstructure and corrosion behavior’, Surface & Coatings Technology, 228, pp.92-99.

Xi, K, Wu, H, Zhou, C, Qi, Z, Yang, K, Fu, R K, Xiao, S, Wu, G, Ding, K, Chen, G & Chu, P K 2022, ‘Improved corrosion and wear resistance of micro-arc oxidation coatings on the 2024 aluminum alloy by incorporation of quasi-two-dimensional sericite microplate’, Applied Surface Science, 585, pp.152693.

Yahya, I N D, Sofyan, N, Khaerudini, D S, Timuda, G E & Priyono, S 2023, ‘Characteristics of Sodium Lithium Titanate Synthesized at Different Solid-State Reaction Temperature for Lithium-Ion Battery Anode’, Journal of Materials Exploration and Findings, 2(3), pp.122-131.

Yücel, A, Yildirim, Ç V, Sarikaya, M, Şirin, Ş, Kivak, T, Gupta, M K & Tomaz, Í V 2021, ‘Influence of MoS 2 based nanofluid-MQL on tribological and machining characteristics in turning of AA 2024 T3 aluminum alloy’, Journal of Material Research and Technology, 15, pp.1688-1704.

Zhang, T, Jiang, W, Wang, H & Zhang, S 2019, ‘Synthesis and localized inhibition behaviour of new triazine-methionine corrosion inhibitor in 1 M HCl for 2024-T3 aluminium alloy’, Materials Chemistry and Physics, 237, pp.121866.

Zhang, Z, Liu, F, Han, E H & Xu, L 2020. ‘Mechanical and corrosion properties in 3.5% NaCl solution of cold sprayed Al-based coatings’, Surface & Coatings Technology, 385, pp.125372.

Recommended Citation

Marda, Yanuar Mohamad; Riastuti, Rini; and Ibrahim, Muhammad Hamka (2024) "Feasibility Study of Using Energy Extracted from The Process of Electrochemically Consumed of Al 2024 for Powering Daily Used Electric Car," Journal of Materials Exploration and Findings: Vol. 3: Iss. 2, Article 3.
DOI: 10.7454/jmef.v3i2.1050
Available at: https://scholarhub.ui.ac.id/jmef/vol3/iss2/3