Implementation of Kansei Engineering Method in Designing Spreadable Cheese Packaging

Authors

• Novi Purnama Sari, Department of Graphics and Printing Engineering, Jakarta State Polytechnic, University of Indonesia, Depok 16425, IndonesiaFollow
• Mega Analisa, Department of Graphics and Printing Engineering, Jakarta State Polytechnic, University of Indonesia, Depok 16425, IndonesiaFollow
• Suci Puji Lestari, Department of Graphics and Printing Engineering, Jakarta State Polytechnic, University of Indonesia, Depok 16425, IndonesiaFollow
• Khofifah Nur Amalia, Department of Graphics and Printing Engineering, Jakarta State Polytechnic, University of Indonesia, Depok 16425, IndonesiaFollow

Abstract

Some spreadable cheese packaging uses flexible plastic without additional features and easily damaged boxes. This packaging causes several problems, such as difficulty in re-storage, loss of product information due to damaged box packaging, wasteful use of packaging materials, and making the product less hygienic. The purpose of this study is to develop packaging that focuses on consumer emotions. The packaging was developed using the Kansei Engineering method, supported by Principal Component Analysis (PCA) as a determinant of the design concept, and Quantification Theory Type 1 (QTT1) to identify design elements. This study produced 46 packaging samples and 40 Kansei words. The resulting design concept has the highest principal component value, namely safety-practical, with an R-Square value of 0.7855. The design elements for the safe concept to being developed consist of a unique box shape (X1), PP plastic material (X2), medium size (X3), modern design style (X4), twist cap (X5), printing technique using stickers (X6), and upward lid orientation (X7). The results of this study successfully realized safe packaging through the selection of rigid plastic (PP) material with a twist cap. These results can also indicate consumer needs for functional packaging that solves product problems.

References

R. Putri, H. Juhroni, Abdihaz Jurnal Ilmiah Pengabdian Masyarakat. 3/2 (2021) 87.

M. Kamelia, Supriyadi, D.N.Y. Afif, Prosiding Seminar Nasional Penelitian Pengabdian Kepada Masyarakat. (2021) 1237.

Y. Sudodo, Jurnal Ekonomi Bisnis Indonesia. 4/1 (2019) 23.

A.A.R. Nur, A.R.P. Alam, A. Anggi, Movere J. 1/2 (2019) 111.

G.A. Prahara, I. Sumargono, S. Hidayat, W.D. Kumala, N.A. Radhitya, Prosiding Konferensi Nasional Pengabdian Kepada Masyarakat dan Corporate Social Responsibility (PKM-CSR). 6 (2023).

I. Mania, A.M. Delgado, C. Barone, and S. Parisi, In: Traceability in the Dairy Industry in Europe, Springer, Cham, 2018, p.141.

M. Nagamachi, A.M. Lokman, Kansei Innovation: Practical Design Applications for Product and Service Development, CRC Press, Boca Raton, 2015, p.129.

M. Hartono, Int. J. Ind. Ergon. 79 (2020) 102985.

M. Hartono, Kansei Engineering di Industri Jasa: Pendekatan Ergonomi Kontemporer, Media Nusa Creative Press, Malang, 2018.

H. Oemar, H.F. Safira, D.S. Mulyati, A. Saleh, J. Ind. Eng. Manage. 8/2 (2023) 129.

O. Adiyanto, H.A. Jatmiko, Erni, Int. J. Sci. Technol. Res. 8/12 (2019) 1778.

N. Sari, V. Akkili, M. Muryeti, Agrointek: Jurnal Teknologi Industri Pertanian, 18/3 (2024) 742.

N.P. Sari, D.F. Indriany, F. Yunisyah, N.N. Wiguna, Jurnal Teknologi. 17/1 (2025) 53.

D. Delfitriani, Diki, F. Uzwatania, Jurnal Agroindustri Halal. 8/1 (2022) 13.

N.P. Sari, E. Hafidah, Rizwan, E. Hafidah, S.Z.P. Andriyani, Performa Media Ilmiah Teknik Industri. 22/2 (2023) 109.

N.P. Sari, W. Prastiwinarti, A.M. Lokman, I. Yamin, Makara J. Technol. 1 A. Isna, L. Yennia, et al., In: Tw. Tsai, K. Chen, T. Yamanaka, S. Koyama, S. Schütte, A. Mohd Lokman (Eds.), Kansei Engineering and Emotion Research, KEER 2024, Communications in Computer and Information Science, vol. 2313, Springer, Singapore, 2024, p.15.

N.P. Sari, A. Isna, D. Maharani, F. Fadhillah, Jurnal INTECH. 10/1 (2024) 18.

C. Andrade, Indian J. Psychol. Med. 43/1 (2021) 86.

X. Li, J. Eng. Sci. Technol. Rev. 11/1 (2018) 84.

S.A. Kadir, A.M. Lokman, T. Tsuchiya, S.M. Shuhidan, J. Phys. Conf. Ser. 1529 (2020) 022018.

I.R. Aprilia, N.P. Sari, J. Buletin Poltanesa. 26/2 (2025) 598.

S.Z.P. Andriyani, N.P. Sari, J. Buletin Poltanesa. 26/2 (2025) 611.

D. Hediyati, I.M. Suartana, J. Inf. Eng. Edu. Technol. 5/2 (2021) 49.

S. Nasution, J. Hidayati, N.A. Nissa, S.M. Agustiara, IOP Conf. Ser. Mater. Sci. Eng. 1122 (2021) 012117.

N.P. Sari, J. Nursya’bani, S.A.P. Sandjaja, T.B. Satriaji, J. Teknol. 17/1 (2025) 13.

N.A.N. Ahmad, A. Iqbal, H. Suhaimi, A.M. Lokman, Int. J. Adv. Comput. Sci. Appl. 13/10 (2022) 574.

M.A. Ghiffari, T. Djatna, I. Yuliasih, Sustainable Environ. Agric. Sci. 2/1 (2018) 10.

N.P. Sari, D.F. Indriany, F. Yunisyah, N.N. Wiguna. Jurnal Teknologi. 17/1 (2025) 53.

M.E. Apriyanti, Sosio e-Kons. 10/1 (2018) 20.

A.N. Mufreni, Jurnal Ekonomi Manajemen. 2/2 (2016) 48.

K. Ufrida, S. Harianto, Jurnal Analisa Sosiologi. 11/1 (2022) 137.

N. Sari, I. Sa’diyah, M. Muryeti, Agrointek Jurnal Teknologi Industri Pertanian. 18/4 (2024) 871.

Recommended Citation

Sari, Novi Purnama; Analisa, Mega; Lestari, Suci Puji; and Amalia, Khofifah Nur (2026) "Implementation of Kansei Engineering Method in Designing Spreadable Cheese Packaging," Makara Journal of Technology: Vol. 30: Iss. 1, Article 5.
DOI: 10.7454/mst.v30i1.1661
Available at: https://scholarhub.ui.ac.id/mjt/vol30/iss1/5